Lock Bumping

Lock bumping is becoming increasingly popular because of its ability to bypass a lock without the need to have lock picking tools. All that is required is a key blank which corresponds to the specific lock which you would like to bypass. The correct key blank is then shaped with a square file which will force the key pins to move to their maximum position in the lock. The file blank which has been prepared is now inserted into the lock and is then lightly tapped with a lock bumping hammer while at the same time the key is gently turned. This results in a situation where that tapping from the hammer manipulates the pins in such a way so that the key is allowed to turn as the pins line up with the shear line. This is a somewhat difficult concept to explain in written content and therefore it may be best to watch a video which can better explain this process.

History of lock bumping

According to a website dedicated to the issue of bumping locks this locks originated in Denmark in 1970. However the process of using a bump key was only discovered several years later. It was only recognized as a home security issue in 2002. Nevertheless LockBumping.org is still one of the best sources in the industry when it comes to the issue of lock bumping. There can be no doubt that in an event where a key was lost, the ability to have access to a working bump key, can save the home owner a lot of money, because it might be possible to avoid the unnecessary costs of having to contact a locksmith. This process will be especially helpful when coming home late at night only to discover that you’re key has been lost and therefore you cannot get into your own home. Having a functioning bump key around can certainly help to avoid a lot of unnecessary frustration and especially so if it is a cold night and you have company.

What about the lock bumping hammer?

Anything from a hammer to a screwdriver will provide the same effect as an actual lock bumping hammer in the event that such a specialized tool is not available. You are not trying to construct a structure which requires a professional construction hammer. You are simply going to exert gentle pressure on the lock. Just remember that using any of these lock picking tips in an illegal way can constitute a felony not only in the US but also in other countries. Therefore only use the lock bumping technique to open your own door and then also preferably only in an emergency situation because unnecessary hammering may result in a damaged lock which will then need to be replaced. Nevertheless the lock bumping process can teach homeowners very important facts about home security and how easily that security can be breached with the minimal and also the most basic lock picking equipment.